Focus on Innovation
Reshape The Future of Industry
Home > About Us > Blog > February2019
Laser tube using tips on laser die board cutting machine
By Owen  2019-02-19
laser die board cutting machine, laser die making machine,
Many users who have laser die making machine are not familiar with the performance characteristics of laser tubes. They are not well protected and cause many unnecessary damages. Now we have some experience for your reference:

 

1. The slender laser tube on laser die board cutting machine is very sensitive to the position of the bracket. If it’s asymmetry or too close to each other or too far, it will have a significant impact on the power mode. It is easy to have a power difference of about 10 watts. The internal suspension structure is best only in the direction of a certain angle, so the installation is as close as possible to the direction of the marking and the position of the bracket, and the effect is best.

 

2. Water circulation in laser die making machine. The water cooling power is high, so the cooling effect is good, take care that the water not to be dirty, otherwise the pipe loop is more narrow and thin, if blocking it will burn out the pipe. The water must be pushed in and out. The internal air will not accumulate and affect the heat dissipation and power life.

 

3. Light-emitting lens, many users only pay attention to cleaning three mirrors and focusing mirrors, but often ignore the laser tube light-emitting lens, because laser die board cutting machine works with more gray smoke, the window lens will hang gray, this layer of ash absorbs the laser first, and a large amount of heat is taken away by water cooling. Generally, it loses 10% to 40% of the power, and the coating of the antireflective coating is ablated due to the high heat of ash, even if it is cleaned again. The agent can not be wiped off, forming a permanent plaque to block a lot of light, so that it can not be cut normally. This is the most important maintenance link, but it is ignored by many users.

57.8K
Green World Environmentally friendly die

Dongguan Yisong High Technology Co., Ltd.


Add: 3rd Floor, Huafeng Bld., Huangjin Road, Baima Village, Nancheng District, Dongguan Guangdong 523000, China

E-mail: sales@yisongcnc.com
TEL:+86(0)769-3897 1768
sitemap privacy policy Copyright © Yisong High Technology All Rights Reserved