The daily operation of the laser die cutting machine is risky. Laser die cutting machine operators need to pay attention to detail and operate in accordance with the operating procedures and problems can be better avoided. Let us talk about the general details of operating the laser die cutting machine and see how to avoid unnecessary problems.

1. The laser die cutting machine’s operator must be trained to be familiar with the structure and performance of the laser die cutting machine and master the knowledge of the operating system.

2. When an abnormality is found on the laser die cutting machine during the processing, operators should stop laser die cutting machine immediately, and the fault should be eliminated or reported to the supervisor in time.

3. Obey the safe operation rules of laser die cutting machine. The laser die cutting machine should be started in strict accordance with the laser die cutting machine start-up procedure.

4. Wear labor protection articles as required, and wear protective glasses that meet the requirements in the vicinity of the laser beam.

5. Keep the laser generator, laser tabled and surrounding area clean, orderly and free of oil, and stack the work piece, sheet and waste according to regulations.

6. When laser die cutting machine is started, the operator must not leave the work position without permission or trust other person to be in charge. If it is necessary to leave, the laser die cutting machine power switch should be cut off.

7. Do not cut a material before it can be irradiated or heated with laser die cutting machine to avoid the potential hazard of smoke and vapor.

8. Keep the fire extinguisher at your fingertips; turn off the laser generator or shutter when the laser die cutting machine is not working; do not place paper, cloth, or other flammable materials near the unprotected laser beam.